(as of May 02,2021 09:08:36 UTC – Details)
This Ubertooth bundle includes everything you need to get started with development, including the Ubertooth module installed into a protective, shielded aluminum enclosure and a 2.4GHz antenna. The Ubertooth One is an open source 2.4 GHz wireless development platform suitable for 2.4GHz experimentation. Based on the powerful LPC175x ARM Cortex-M3 microcontroller with full-speed USB 2.0, the Ubertooth One is a great way to develop custom Class 1 devices. The entire board is only two and a half inches long with a USB-A connector at one end and an RP-SMA connector at the other. One thing that sets the Ubertooth apart from other 2.4GHz development platforms is that it’s capable of not only sending and receiving 2.4 GHz signals, but can also operate in monitor mode, monitoring traffic in real-time. This operating mode has been present in low-cost WiFi modules for years and has found myriad uses in research, development and security auditing but no such solution existed for 2.4GHz standards until now. Also, because it’s a fully open-source platform (software and hardware), the schematics and code are readily available for all of your hacking needs. Dimensions: 61.75mm x 19mm (2.43″ x 0.75″)
Everything you need to get started with 2.4GHz development, including Ubertooth One module installed into a custom shielded aluminium enclosure and a 2.4GHz duck antenna!
All bundle components covered under warranty for 2 years, directly through Nooelec
Ubertooth One is a configurable 2.4GHz transceiver with great application software and support; and with suitable transmit power and receive sensitivity for 2.4GHz development
Standard Cortex Debug Connector (10-pin 50-mil JTAG) In-System Programming (ISP) Serial Connector
Expansion connector intended for inter-Ubertooth communication or other future uses